I have fully ignored the other fittings that were screwed to the decks
so now its a bit of guess work as to where they went, one cleat for the rudder system and one guide for the centre board system .....
this looks right ...... I gather it was used as a haulup to lift the plates up, as to whether it was simitainously of individualy I'm not sure, one thing I am sure of is that the system had been deleted, the cord has long been cut on one plate and is completely missing on the other.
one less thing I need not worry about then
view in both pics from the tramp side (shroud mount in the background)
plate down & showing the corresponding scuff marks on the plate's head.
plate up, showing the remains of the cord ....