B.2.3. BOWSPRIT
The bowsprit shall be made of extruded aluminium profile of constant section.
The length shall not be greater than the distance, measured in total from its attachment point
from the centre of the front beam to the vertical line touching the most forward part of the hull,
with the bowsprit measured when level to the deck of the catamaran, plus an additional
800mm.
The bowsprit shall be fixed and approximately on the longitudinal centreline of the boat. See
diagram.
The forward end of the bowsprit shall be rounded and blunt.

David Ingram
F18 USA 242
http://www.solarwind.solar

"Do or do not. There is no try." - Yoda
"Excuses are the tools of the weak and incompetent" - Two sista's I overheard in the hall
"You don't have to be a brain surgeon to be a complete idiot, but it helps"