The foam is almost done for this side of the main hull. I have a one-foot tail section to build that narrows into a finer shape. The foam did not want to flow into that shape so I'm adding it on this week-end or so. I'm bogging the inside with West System Epoxy mixed with 407 powder. There is a lot of sanding to fair it out but 60 grit cuts pretty good. The fairing will allow the Carbon Fiber to have a smooth surface to bond against. I've been busy trying to get the inside laminate done in the next 14 days. More postings on the web site of the foamed up shape follow the link below.
Website for more pictures Pages 12-14
http://themanshed.net/tms-20-trimaran/foam/?g2_page=12Mike