Rolf, have forgotten exactly what i was doing there, will use my newly purchased spray dry lube on the traveler car rollers, thanks for tip
do need to replace the rough old line
They say not to lube up delron bearings as it will cause them to not roll and get flat spots
the new OneDrop from McLube works well and is under $10. I also HAVE to lube (silicone) up my track every weekend to help my car slide (or it wont slide under tension)
on my TheMightyHobie18 you HAD to release main pressure if you wanted to travel.
I probably need new car/track but the x track is part of my rear beam so there is no easy/reasonably cheap upgrade. my x track is getting so sharp from use i cut my hands pulling my cat up the beach 2 weeks ago. time to fix that...
