Boat: Nacra F18 Infusion

Likes:
1) Hull design holding up well in terms of overall competitiveness.
Dislikes:
1) X-beam bolt Designs. Stainless steel/aluminum interface connections at hulls and beams *will* result in galvanic corrosion if not watched , bolts regularly/ carefully treated. Quite plainly, an epic, idiotic design fail. All connections should be of similar metal, esp at water soaked areas, best solution to this issue would be allow non-galvanic titanium bolts in place of steel for the interface (bolts not as expensive as you think), but stainless bolt/stainless thread would be okay too. (heavy though)too. Related: Why design a boat with 2 different bolt heads on front and rear? Please Explain? (Dumb) Rear bolt heads low profile a PITA.
2) Stock snuffer material (i.e. not the sailcloth type, but the black stuff) totally degrades and falls apart in about 2-3 years.
3) Lack of tack-line grommet on tramp means you probably will saw through your tramp if rigged for speed.
4) Stock shroud adjusters are wetsuit carnivorous. Ronstan's design way better.
5) Jib hook arrangement funky/halyard a little fragile
6) Daggerboards nice and sturdy, but trunk panels inside, pretty meager. Stoppers on older boats a little primitive
7) lack of port shroud upf*&^ker hardware
8) Tuning guide a total crock.