Forgive me if this topic has already been covered. Did a couple of searches and didn't find anything substantive.

What is the material of choice and best technique to manage the near constant chips and chunks that my trunks are eating out of the @#&^%! gybing boards? Any hints on how to minimize the damage in the first place?

Not knowing any better way, my method for now is with a clear 2-part hobby epoxy with some graphite mixed in for color. Using some 12"x3" and 16"x3" lexan strips and wax paper on top/bottom with clamps to mold it to shape while it cures. Then I go back and trim the flash, sand, polish, etc.

Only concern I have now is the gelcoat over epoxy issue if I ever decide they need it. Although it would be easy enough to remove the epoxy if I was going for a full-blown refurbish- they're pretty new so that's a long way off (I hope).