Originally Posted by phill

I weighed out the resin to give a 50/50 resin glass ratio and applied with a roller.
Followed this with peel ply etc and put between to panes of plate glass with 3 layers of bricks on top.
Once fully cure the laminate just peeled off the foam as I took the peel ply off.

(Although I think had I primed the foam with resin before the galss was added and/or been warmer it would have made it less likely to delaminate so easily.)



Not really hard to see the problem here in hind sight Phill.

you mixed 50:50 resin.

Lost 10-20% of that into the peel ply
another 10-20% into the foam.

That left you with a resin:cloth ratio of about 30:70.

Last edited by Scarecrow; 07/06/15 11:29 PM.