The boat came with the jib poles , as well as an MX main, but not with an MX jib, unfortunately. I spoke to Jay Glaser about a new jib, and he recommended doing a self-tacking set up instead with a used Tornado jib, similar to what other people have written about here. He felt it could be done for about the same price as a new MX jib. The whole idea is very appealing, especially if it can be accomplished with most of the existing rig, only adding the curved track, traveler, and necessary lines. I really haven't even gotten into researching this yet, as I'm still deep into bringing the rest of the boat back up to spec and trying to get it finally into the water, and whether his cost estimate is accurate or not is the big question. Based on the prices from Performance Cat for the rudder kit, I'm not sure if I could get the jib parts from them reasonably enough. Perhaps something from Harken would work, but I need to get into it more in order to figure it out.