Announcements
New Discussions
Sail selection for DIY inflatable sailing catamaran
by almoniyot. 08/16/19 07:37 AM
Sail selection for DIY inflatable sailing catamaran
by almoniyot. 08/16/19 06:11 AM
‘81 SC17 trampoline track fix?
by tyronewarriner. 08/13/19 10:05 PM
New England 100 2019: 30th Anniversary!!!
by Damon Linkous. 08/13/19 04:57 PM
Old school
by northsea junkie. 08/10/19 03:14 PM
Fair Wind and Following Seas Dior Hubel
by cyberspeed. 08/08/19 11:12 PM
Let's see what we have here
by FrankyDub23. 08/08/19 06:49 PM
Shameless Self Promotion Post
by FrankyDub23. 08/08/19 06:41 PM
Looking a for a Hobie Wave! East Coast
by dave mosley. 08/07/19 03:11 PM
Length of Nacra 5.7 tiller crossbar
by JohannesM. 08/02/19 05:07 AM
Things to do and not to do flying a spin
by Timbo. 07/30/19 02:31 PM
Previous Thread
Next Thread
Print Thread
Rate Thread
Hop To
Things to do and not to do flying a spin #289153
07/11/19 10:52 AM
07/11/19 10:52 AM
Joined: Jul 2006
Posts: 304
H
Hullflyer1 Offline OP
enthusiast
Hullflyer1  Offline OP
enthusiast
H

Joined: Jul 2006
Posts: 304
I also posted this on the beach cats

Would like to put together a list of things never to do and things to always do when flying a spinnaker.

We have 5 new to the sailors on the beach spinnaker boats. None have flown spinnakers yet.
2 Hobie Tigers
3 Nacra F18
1 Nacra 20

Would greatly appreciate any help putting this list together.

PS We had 22 boats out on the 4th of July

-- Have You Seen This? --
Re: Things to do and not to do flying a spin [Re: Hullflyer1] #289157
07/30/19 08:48 AM
07/30/19 08:48 AM
Joined: Jan 2005
Posts: 6,044
Sebring, Florida.
Timbo Offline
Carpal Tunnel
Timbo  Offline
Carpal Tunnel

Joined: Jan 2005
Posts: 6,044
Sebring, Florida.
I assume all the boats have snuffers? Mid pole or the old school end of the pole toilet seat?

Make sure they bear off to nearly dead downwind before they hoist, and hoist as fast as humanly possible to keep the kite out of the water!

On the drop, again bear off but not as deep or the sheets might wrap around the snuffer hoop and jam up the works, and don’t release the halyard until you’ve got the retrieval line in hand ready to pull and again, snuff as fast as humanly possible to keep the kite out of the water.

Shrimping is slow.

When flying the kite, be ready to quickly bear off and ease the sheet with every gust, and keep your weight near the back of the boat or you will stuff the low bow and go swimming. You have to sail looking back over your shoulder for the next puff and be ready to bear away quickly when it hits. Keep the kite trimmed so the luff is just about to curl, constantly ease and trim to keep it in the groove.

Apparent wind is what you want to generate so once the kite is up, sheet in and slowly head up to build speed, once you accelerate ease the sheet and then slowly bear off as the boat accelerates to keep the apparent wind in the sweet spot, just forward of 90 degrees. Oh, and open the jib up so the jib slot isn't choking off the backside wind flow. You don't want the jib flapping, but eased enough so the airflow through the slot is smooth.

Last edited by Timbo; 07/30/19 09:14 AM. Reason: spiritual clarity

Blade F16
#777
Re: Things to do and not to do flying a spin [Re: Timbo] #289158
07/30/19 09:52 AM
07/30/19 09:52 AM
Joined: Jan 2007
Posts: 139
Hernando, Florida
M
Mlcreek Online content
member
Mlcreek  Online Content
member
M

Joined: Jan 2007
Posts: 139
Hernando, Florida
Mast rotation and down haul?


Forrest
I-20
USA 645

" There ain't enough rum in the drum!"
Re: Things to do and not to do flying a spin [Re: Hullflyer1] #289159
07/30/19 02:31 PM
07/30/19 02:31 PM
Joined: Jan 2005
Posts: 6,044
Sebring, Florida.
Timbo Offline
Carpal Tunnel
Timbo  Offline
Carpal Tunnel

Joined: Jan 2005
Posts: 6,044
Sebring, Florida.
Mast all the way out, down haul off.

But do NOT let the main sheet go slack, keep it pretty snug, it is the backstay and it is the only thing working against the pull of the spinnaker halyard to keep the mast from snapping under the spin loads.

The apparent wind should be about 90 degrees off the bow so the main can stay sheeted in and fairly flat, ease the traveler down a foot or two, more if it’s really blowing and way out just before you jibe, but do not let the main sheet get slack when the spin is up and pulling.

Last edited by Timbo; 07/30/19 02:33 PM. Reason: Sp.

Blade F16
#777

Moderated by  Damon Linkous 

Search

Who's Online Now
0 registered members (), 24 guests, and 418 spiders.
Key: Admin, Global Mod, Mod
Newest Members
Bagol, almoniyot, FractionalSloop, Espen, FrankyDub23
7949 Registered Users
Top Posters(30 Days)
Timbo 3
brucat 2
JeffS 1
Forum Statistics
Forums26
Topics22,362
Posts266,916
Members7,949
Most Online795
Apr 8th, 2019
--Advertisement--
Powered by UBB.threads™ PHP Forum Software 7.7.1