Announcements
New Discussions
Previous Thread
Next Thread
Print Thread
Rate Thread
Hop To
Tiller question #84534
09/12/06 03:02 PM
09/12/06 03:02 PM
Joined: Apr 2005
Posts: 292
Ontario, Canada
Captain_Dave Offline OP
enthusiast
Captain_Dave  Offline OP
enthusiast

Joined: Apr 2005
Posts: 292
Ontario, Canada
Hi all,

Last year I purchased a new aluminum tiller for my H16. This year I occassionally experienced erratic/poor locking of the tiller itself. Now it is broken in-half.

My question is; which tiller should I buy if I want to have something better?

I have seen the Arriba Hotstick in the catalog but know nothing about it.

...looking for advice, and really want a tough and reliable tiller so that I do not have to buy another one next year.


Thanks,

Dave

-- Have You Seen This? --
Re: Tiller question [Re: Captain_Dave] #84535
09/12/06 03:56 PM
09/12/06 03:56 PM
Joined: Sep 2005
Posts: 1,187
38.912, -95.37
_flatlander_ Offline
old hand
_flatlander_  Offline
old hand

Joined: Sep 2005
Posts: 1,187
38.912, -95.37
For goofing around you can't go wrong with the Hotstick type tiller extension. Invariably the extension will get dropped in between the rear crossbar and the tiller crossbar, then the extended end catches a wave and is bent back violently, only to return to its normal position. With regular cleaning and common sense use they will last through quite a few "accidents".

That said, a lot of people like to race using the standard issue Hobie, non-extendable tiller.

Last edited by flatlander18; 09/12/06 03:57 PM.

John H16, H14
Re: Tiller question [Re: Captain_Dave] #84536
09/12/06 04:05 PM
09/12/06 04:05 PM
Joined: Sep 2005
Posts: 1,187
38.912, -95.37
_flatlander_ Offline
old hand
_flatlander_  Offline
old hand

Joined: Sep 2005
Posts: 1,187
38.912, -95.37
Dave,

Did you break it in half over your knee? <img src="http://www.catsailor.com/forums/images/graemlins/smile.gif" alt="" />

After several "accidents" the bolt, attaching the yoke to the crossbar can get bent. Also look at the plastic washers, or lack there of. We like to use the old style crossbar slop kit washers with round side to match the crossbar and flat surface to mate with the yoke. Tightens things up considerably.


John H16, H14
Re: Tiller question [Re: _flatlander_] #84537
09/12/06 07:07 PM
09/12/06 07:07 PM
Joined: May 2006
Posts: 182
Coopersburg, PA
V
Vinny_M Offline
member
Vinny_M  Offline
member
V

Joined: May 2006
Posts: 182
Coopersburg, PA
Personally, I prefer to use the Ariba Hotstick. It is the most durable extension I have used and has survived probably more accidents than it should have. I would highly reccomend this for racing and cruising.


~vinny~
Re: Tiller question [Re: Vinny_M] #84538
09/12/06 08:20 PM
09/12/06 08:20 PM

A
Anonymous
Unregistered
Anonymous
Unregistered
A



Dave:

The Arriba Hotstick is the way to go. BUT you must keep it CLEAN. You can use a swimming pool if one is handy. Or you can fill a bath tub with water, angle the stick with handle end in tub and at the attachment end, put a little bit of dishing washing soap. Start slowing moving it in and out till all the crap is out of it. DON"T due this in slat water as it still has dirt and salt in it, MUST be fresh water. If you do this it will last a long tie and never stick on you. I also add the cork all which help it float if you drop it while tacking. You will lie it.

Doug Snell
Hobie 17 "Stress Free" #007

Re: Tiller question [Re: Captain_Dave] #84539
09/12/06 08:31 PM
09/12/06 08:31 PM
Joined: Apr 2005
Posts: 29
Banner Elk, NC
Bill K. Offline
newbie
Bill K.  Offline
newbie

Joined: Apr 2005
Posts: 29
Banner Elk, NC
If you're really desperate (and have a spare aluminium ski pole) you can take the basket off, drill a hole through the bottom and insert your quick release or pin through, making a very nice tiller. This was done out of necissity after I left my tiller at home one day. I use a tripod made of old ski poles to help raise the main so a pole was the only thing I had and it worked damn well, the handle on the pole was great as long as I wasn't trap'n out.

My twenty-five year old fiberglass(wrapped in electrical tape) tiller works just fine though, even on trap. I attached a yellow foam practice golf ball from Wal-mart to the end with gorilla glue for extra leverage and ergonomics. It's easier to hold with lots of weather helm.


83' Hobie 16
Re: Tiller question [Re: Captain_Dave] #84540
09/13/06 11:59 AM
09/13/06 11:59 AM
Joined: Jul 2005
Posts: 306
St. Louis, MO
hobienick Offline
enthusiast
hobienick  Offline
enthusiast

Joined: Jul 2005
Posts: 306
St. Louis, MO
Dave,

I upgraded my stock H16 fibergalss stick to the Ariba. Loved it! Especially when I had to paddle the boat. I would sit on teh hull just in front of the tramp and the Ariba would extend long enough for me to effectivly steer while seated in the "paddling position". My current boat came with one. I have no idea how old it is but I would guess at least 10 years. It is in great shape and still works very well.


Nick

Current Boat
Looking for one

Previous Boats
'84 H16
'82 H18 Magnum
'74 Pearson 30
St. Louis, MO
Re: Tiller question [Re: _flatlander_] #84541
09/14/06 10:09 AM
09/14/06 10:09 AM
Joined: Apr 2005
Posts: 292
Ontario, Canada
Captain_Dave Offline OP
enthusiast
Captain_Dave  Offline OP
enthusiast

Joined: Apr 2005
Posts: 292
Ontario, Canada
Thanks to everyone (once again) for the timely and helpful information.

I have ordered a Hotstick.


Can I assume the Hotstick uses the same tiller yoke as the aluminum sticks? I already have a couple spare yokes and I am hoping I will still be able to use them.


Dave <img src="http://www.catsailor.com/forums/images/graemlins/laugh.gif" alt="" />

Re: Tiller question [Re: Captain_Dave] #84542
09/14/06 10:41 AM
09/14/06 10:41 AM
Joined: Sep 2005
Posts: 1,187
38.912, -95.37
_flatlander_ Offline
old hand
_flatlander_  Offline
old hand

Joined: Sep 2005
Posts: 1,187
38.912, -95.37
From Hobie yoke is included with the aluminum and hot sticks. Looks to be same as aluminum sticks yoke.

Sold with because the standard sticks "short" yoke won't work.


John H16, H14
Re: Tiller question [Re: Captain_Dave] #84543
09/27/06 09:40 AM
09/27/06 09:40 AM
Joined: Aug 2001
Posts: 251
beaufort, sc
dannyb9 Offline
enthusiast
dannyb9  Offline
enthusiast

Joined: Aug 2001
Posts: 251
beaufort, sc
now i'm using pvc with an aluminum yoke. i have broken two hotsticks. i ran over a friend in a laser when my last one slipped while i was trying to bear off behind him. the extension was cracked i think because i sat on it... my pvc extension is flexible so it doesn't break, its lightweight, it's water tight and floats with a pvc end cap. it doesn't conduct electricity. its more comfortable than aluminum. it extends forward to the shrouds (about 90" long) so its just long enough for me to steer from the trap. it has proven to be durable: i've been using it for a couple of years and i sail a lot- a couple of times a week, year round...But it isn't legal. i still have my old fiberglass 'legal' one.


marsh hawk
Re: Tiller question [Re: dannyb9] #84544
09/29/06 12:30 PM
09/29/06 12:30 PM
Joined: Jun 2001
Posts: 1,252
California
mmiller Offline
veteran
mmiller  Offline
veteran

Joined: Jun 2001
Posts: 1,252
California
Quote
But it isn't legal. i still have my old fiberglass 'legal' one.


Any non-conductive material would be class legal.


Hobie Cat Forums
Matt Miller
Hobie Cat Company
Re: Tiller question [Re: ] #84545
10/01/06 08:37 PM
10/01/06 08:37 PM

A
Anonymous
Unregistered
Anonymous
Unregistered
A



Quote
Dave:

The Arriba Hotstick is the way to go. BUT you must keep it CLEAN. You can use a swimming pool if one is handy. Or you can fill a bath tub with water, angle the stick with handle end in tub and at the attachment end, put a little bit of dishing washing soap. Start slowing moving it in and out till all the crap is out of it. DON"T due this in slat water as it still has dirt and salt in it, MUST be fresh water. If you do this it will last a long tie and never stick on you. I also add the cork all which help it float if you drop it while tacking. You will lie it.

Doug Snell
Hobie 17 "Stress Free" #007


Dave:

As I said before. Just remember to keep it clean. If sand are dirt gets in it, it will lock up.

Doug

Re: Tiller question [Re: Captain_Dave] #84546
10/03/06 09:40 AM
10/03/06 09:40 AM
Joined: Aug 2001
Posts: 251
beaufort, sc
dannyb9 Offline
enthusiast
dannyb9  Offline
enthusiast

Joined: Aug 2001
Posts: 251
beaufort, sc
mattmiller you're a class act. thanks. i really appreciate your participation on this board. its great to get info from the source. you da man! by the way its good to see resurgence in the h16 fleets, great boat.


marsh hawk
Re: Tiller question [Re: Bill K.] #84547
11/14/06 10:45 AM
11/14/06 10:45 AM
Joined: Sep 2003
Posts: 270
Nepean (Ottawa) Ontario Canada
Frozen Offline
enthusiast
Frozen  Offline
enthusiast

Joined: Sep 2003
Posts: 270
Nepean (Ottawa) Ontario Canada
Quote
If you're really desperate (and have a spare aluminium ski pole) you can take the basket off, drill a hole through the bottom and insert your quick release or pin through, making a very nice tiller. This was done out of necissity after I left my tiller at home one day. I use a tripod made of old ski poles to help raise the main so a pole was the only thing I had and it worked damn well, the handle on the pole was great as long as I wasn't trap'n out.

My twenty-five year old fiberglass(wrapped in electrical tape) tiller works just fine though, even on trap. I attached a yellow foam practice golf ball from Wal-mart to the end with gorilla glue for extra leverage and ergonomics. It's easier to hold with lots of weather helm.


Hey sounds like a terrific idea. Also the ski pole could be used like a ginpole for raising that mast if it should fall whilst sailing. I had it happen and sounds like just maybe a ski pole would make a makeshift mast raiser


Cheers
Alan F

Tiger

Moderated by  Damon Linkous 

Search

Who's Online Now
0 registered members (), 446 guests, and 94 spiders.
Key: Admin, Global Mod, Mod
Newest Members
Darryl, zorro, CraigJ, PaulEddo2, AUS180
8150 Registered Users
Top Posters(30 Days)
Forum Statistics
Forums26
Topics22,404
Posts267,055
Members8,150
Most Online2,167
Dec 19th, 2022
--Advertisement--
Powered by UBB.threads™ PHP Forum Software 7.7.1