Announcements
New Discussions
Best spinnaker halyard line material?
by '81 Hobie 16 Lac Leman. 03/31/24 10:31 AM
Previous Thread
Next Thread
Print Thread
Rate Thread
Hop To
Page 6 of 12 1 2 4 5 6 7 8 11 12
Re: F12 design and development [Re: Wouter] #94259
01/09/07 01:01 PM
01/09/07 01:01 PM
Joined: May 2003
Posts: 4,451
West coast of Norway
Rolf_Nilsen Offline
Carpal Tunnel
Rolf_Nilsen  Offline
Carpal Tunnel

Joined: May 2003
Posts: 4,451
West coast of Norway
Wouter,

a protest on the "The real youngsters are best served by something like an optimist.".
The Optimist is too hard to handle for the real youngsters alone. They would be much happier with a friend (or friend to be) to share the experience. A boat with more directional stability would make things a lot easier during launch. This is the experience from watching our clubs Optimist program.

--Advertisement--
Re: F12 design and development [Re: pbisesi] #94260
01/09/07 01:15 PM
01/09/07 01:15 PM
Joined: Sep 2005
Posts: 1,187
38.912, -95.37
_flatlander_ Offline
old hand
_flatlander_  Offline
old hand

Joined: Sep 2005
Posts: 1,187
38.912, -95.37
Pat,

Quote
I get the feeling that Flatlander(John) the customer in my mind and Wouter, the engineer are not on the same page.

Hey, I'm not complaining. Going back to my first post in the Youth thread asking "May we spend some time talking about developing this?" above the image of the F12 concept, to where this is at right now? Wow!
And my nature is, with some engineering background, to think out loud and ask questions. And in that regard this forum is awesome in affording everyone from around the world to throw in their tidbit for concideration.

On the what, why and other than that, what Keith said. <img src="http://www.catsailor.com/forums/images/graemlins/wink.gif" alt="" />

Last edited by flatlander18; 01/09/07 01:18 PM.

John H16, H14
Re: F12 design and development [Re: Stuart_Douglas] #94261
01/09/07 01:41 PM
01/09/07 01:41 PM
Joined: Jun 2004
Posts: 393
Syracuse,N.Y
pbisesi Offline
enthusiast
pbisesi  Offline
enthusiast

Joined: Jun 2004
Posts: 393
Syracuse,N.Y
Quote
If you build it they will come.

This has been said a few times.
Aside from Field of Dreams, I would like to know when it really worked.
I don't ask the questions because I don't want it to work, I ask because I would like it to work.

Our Fleet is arguably the most successful in the country.
We were told that our little Oneida Lake could never handle a National event. We have had many since then along with the largest Cat race in the country last year.

I say this because we also have the resources (People, Facilities, and Know how) to build a lot of these things in a hurry if it makes sense. I have been on the can-do side of things every time. I could probably build most of it with what's in my garage.

The questions still need to be asked.( I have read every post and have learned a lot)
Is having 10 boats really a success. Not to me, especially if their being built by sailors for kids that are sailors already.
We need a bigger pie.

Some of the greatest products ever designed never took off while marginal ones flourished and made people very wealthy.
Why? Sales and Marketing (You really need to look at Hobie here, if not, you haven't really done your How homework).
Good product, Sales and Marketing. Results don't lie.
There must be Design, Ability to Produce, Marketing and ultimately Sales(in this case building and the use of the boat by NEW sailors).

Remember: This all started with "Youth recreation trend"
and how to get more NEW youth sailing.
It's hard to stay on point.

This is at the brain storm phase and I would suggest going back to the What, Why, How on a regular basis to see if your doing what you set out to do.

Wordy disclaimer here


Pat Bisesi Fleet 204
Re: F12 design and development [Re: pbisesi] #94262
01/09/07 01:59 PM
01/09/07 01:59 PM
Joined: Jun 2001
Posts: 9,582
North-West Europe
Wouter Offline
Carpal Tunnel
Wouter  Offline
Carpal Tunnel

Joined: Jun 2001
Posts: 9,582
North-West Europe

Formula 16 and a score of other Australian cat designs.

The moth class has largely been a homebuilders class for decades.

Weren't a lot of tornado's build in ply back in the days.

How did the optimist start ? TIMBER !


I can tell you right now that more of these timbers boats were homebuild then Hobie ever sells in the way of rotomoulded products. The mosquito design alone (now part of F16) was homebuild a couple of thousant times.

And there were more F16's in the last (200 boat) cat event that I went to then Hobie 16's

Now can we PLEASE get of the "HOBIE" bandwagon ? It is like a persistant and gusty crosswind when driving on the freeway of thought.

Besides I think that I can claim some promo and sales skills. That Hobie wave (and let alone the hobie twixxy tuddler doddly humpy dumpy and whatever name they think of next.) is still waaaaaaay behind world status with respect to the F16's.

Now I REALLY don't want to discuss F16's or "I did this ..." or "they didn't do that ..."

So lets leave "Hobie" out of the discussion please and focus fully on the F12 and just MAKE it work.




Sooo, who I volunteering for some work ?

Pbisesi ? Can we invite you to do some analysis work on how such a boat can be build by a group of amateurs at a sail club. This mostly with respect to hulls and sails the other points have al pretty much been covered. What would be too hard for such a group, space confinements, available tooling etc.

Wouter

Last edited by Wouter; 01/09/07 02:04 PM.

Wouter Hijink
Formula 16 NED 243 (one-off; homebuild)
The Netherlands
Re: F12 design and development [Re: Rolf_Nilsen] #94263
01/09/07 02:01 PM
01/09/07 02:01 PM
Joined: Jun 2001
Posts: 9,582
North-West Europe
Wouter Offline
Carpal Tunnel
Wouter  Offline
Carpal Tunnel

Joined: Jun 2001
Posts: 9,582
North-West Europe


Noted Rolf,

Thanks.


Wouter Hijink
Formula 16 NED 243 (one-off; homebuild)
The Netherlands
Re: F12 design and development [Re: Wouter] #94264
01/09/07 02:07 PM
01/09/07 02:07 PM
Joined: Jun 2001
Posts: 1,459
Annapolis,MD
Keith Offline
veteran
Keith  Offline
veteran

Joined: Jun 2001
Posts: 1,459
Annapolis,MD
Quote

Now can we PLEASE get of the "HOBIE" bandwagon ? It is like a persistant and gusty crosswind when driving on the freeway of thought.


LOL! Now that's poetic! <img src="http://www.catsailor.com/forums/images/graemlins/laugh.gif" alt="" />

Re: F12 design and development [Re: Wouter] #94265
01/09/07 02:19 PM
01/09/07 02:19 PM
Joined: Jun 2004
Posts: 393
Syracuse,N.Y
pbisesi Offline
enthusiast
pbisesi  Offline
enthusiast

Joined: Jun 2004
Posts: 393
Syracuse,N.Y
I think you missed the point.
Replace Hobie with Coke, Pepsi, Kleenex, Band Aid etc..

Refusing to at least recognize the success of what Hobie(or any brand above) has done regardless of how you feel about the company, product or the class association is missing an opportunity to learn things that could help you.
Success leaves clues.


Pat Bisesi Fleet 204
Re: F12 design and development [Re: pbisesi] #94266
01/09/07 03:41 PM
01/09/07 03:41 PM
Joined: Sep 2005
Posts: 1,187
38.912, -95.37
_flatlander_ Offline
old hand
_flatlander_  Offline
old hand

Joined: Sep 2005
Posts: 1,187
38.912, -95.37
Quote
I think you missed the point.
Replace Hobie with Coke, Pepsi, Kleenex, Band Aid etc..

Refusing to at least recognize the success of what Hobie(or any brand above) has done regardless of how you feel about the company, product or the class association is missing an opportunity to learn things that could help you.
Success leaves clues.


Yes, I'm missing something. What are you suggesting, look for a Coleman Industries to market and back it? Is what is happening here going on in the wrong way? Should someone walk into XYZ corporation with conceptual drawings, a sales pitch and a "trust me"?

Analogy to the music industry, no big labels will spend any money in developing new talent. Why? They can let the crillions of micro labels develop them and attempt to sign proven, successful acts with no development cost to them.

Opposed to 30 years ago, it seems the same applies here. Mr. Alter had an idea and then he built it, right? And you can say the rest is history, which leads us to today. Is this "concept" earth shattering? No. Is it drawing some interest? Yes. Will it be successful, on the level of the H14/H16? Who knows.

Thank you for all the efforts ladies and gentlemen and pardon my ignorance.


John H16, H14
Re: F12 design and development [Re: pbisesi] #94267
01/09/07 03:58 PM
01/09/07 03:58 PM
Joined: Jun 2001
Posts: 12,310
South Carolina
Jake Offline
Carpal Tunnel
Jake  Offline
Carpal Tunnel

Joined: Jun 2001
Posts: 12,310
South Carolina
Pat's simply saying that if you guys want to achieve a goal, figure out what goal it is because you're all over the place. I didn't read one line of Hobie-centrism in any of Pat's posts - only advise that's used in the majority of any kind of product development. If you guys are just having fun coming up with something, that's one thing...but this project was started under the premise that youth sailing on catamarans, particularly outside of the tight-knit sailing community, is largely non-existent and you wanted to do something about it. HOW are you doing something about it? HOW does this boat apply? HOW should it be designed to meet that goal? so on and so forth. Without some sort of unanimous direction this will end up with a 10 boat rotting fleet...not that there's anything wrong with that if that is all you are after.


Jake Kohl
Re: F12 design and development [Re: _flatlander_] #94268
01/09/07 04:14 PM
01/09/07 04:14 PM
Joined: Jun 2004
Posts: 393
Syracuse,N.Y
pbisesi Offline
enthusiast
pbisesi  Offline
enthusiast

Joined: Jun 2004
Posts: 393
Syracuse,N.Y
John
What I mean is that people have to spread the word outside the current sailing community.
Hobie took off in large part from the Life magazine article and Hollywood movie placements. Bo Derek and such.
(Deep breath Wout, trying to learn here)
Having all this information here or even on it's own website is not nearly enough.
Someone like you will have to go to a local venue such as a yacht club or even a town or state park and pitch the idea to have a sailing program for kids.
You will need a team of people to build maybe 6 boats.
There would need to be some advertising in newsletters, websites and local papers that there is a sailing program available for kids.
Our town holds Parks and Rec for the kids in the summer for a small fee.
These are a bunch of kids that have no idea about sailing that could be introduced and hooked. You could then let the parents know that the plans for the boats are available and maybe have a how to work shop for dads that may have all the tools and ability already to build a boat for his kid that has never turned on a computer.
There are some sail schools at lakes near us, but they are expensive and only known to club members.
Design and building is the easy part. Manpower and marketing to make it successful will be difficult.

PS: Jake got the point

Wouter: How about a break down of the 200 boats and how you did.
Do you have home build numbers vs. factory boats that can be confirmed? That would be interesting.

Last edited by pbisesi; 01/09/07 05:18 PM.

Pat Bisesi Fleet 204
Re: F12 design and development [Re: Jake] #94269
01/09/07 05:41 PM
01/09/07 05:41 PM
Joined: Jun 2001
Posts: 9,582
North-West Europe
Wouter Offline
Carpal Tunnel
Wouter  Offline
Carpal Tunnel

Joined: Jun 2001
Posts: 9,582
North-West Europe


If you see an issue that isn't getting the attention it should then join the group and work it out.

Currently, all you guys are doing is giving "DUH-advice" to others who are doing actual design work.

Pardon my French here, but there are a few "somebodies" involved with this F12 project. Several of us have pretty significant cat projects under our belts. And while we would welcome any help from you in actual design or analysis work, we will welcome it even more if you guys quit dispensing any more "advice" that our own 90 year old and fence sitting grandfathers would come up with.

Wouter


Wouter Hijink
Formula 16 NED 243 (one-off; homebuild)
The Netherlands
Re: F12 design and development [Re: Wouter] #94270
01/09/07 05:50 PM
01/09/07 05:50 PM
Joined: Jun 2001
Posts: 12,310
South Carolina
Jake Offline
Carpal Tunnel
Jake  Offline
Carpal Tunnel

Joined: Jun 2001
Posts: 12,310
South Carolina
Quote


If you see an issue that isn't getting the attention it should then join the group and work it out.

Currently, all you guys are doing is giving "DUH-advice" to others who are doing actual design work.

Pardon my French here, but there are a few "somebodies" involved with this F12 project. Several of us have pretty significant cat projects under our belts. And while we would welcome any help from you in actual design or analysis work, we will welcome it even more if you guys quit dispensing any more "advice" that our own 90 year old and fence sitting grandfathers would come up with.

Wouter


And yet the simple question about "what is this project targeting?" goes unanswered and the name calling and insults have begun. To answer the first sentence of your post, I think this question is a big issue that is not being addressed - so it was raised. I missed the part about official group membership though. If you can't handle public comments, you might reconsider doing this in a public forum.

Would you listen to the advice your 90 year old grandfather would give you?

Re: F12 design and development [Re: Jake] #94271
01/09/07 06:03 PM
01/09/07 06:03 PM
Joined: Feb 2004
Posts: 1,012
South Australia
Darryl_Barrett Offline
old hand
Darryl_Barrett  Offline
old hand

Joined: Feb 2004
Posts: 1,012
South Australia
SHITE !! I just realised, I AM MY 90 YEAR OLD GRAND FATHER.

Re: F12 design and development [Re: Jake] #94272
01/09/07 06:06 PM
01/09/07 06:06 PM
Joined: Jun 2001
Posts: 9,582
North-West Europe
Wouter Offline
Carpal Tunnel
Wouter  Offline
Carpal Tunnel

Joined: Jun 2001
Posts: 9,582
North-West Europe


Jake,

Quote

And yet the simple question about "what is this project targeting?" goes unanswered and the name calling and insults have begun



How about look 13 posts up and see your question anwered.

I'm truly sorry that in this storm of discussion and design work I've only been able to publically log 2/3's of all content. This thread is only 7 days old already I have over 100 pages of information, drag plots, hull shapes, bouyancy calcs when hit bu a gust and what not.

We are in the design phase right now because it is pointless to go up to a local authority with only a sales pitch but no substance. Not because we don't understand how this works.

Other boats at this time are waaay to expensive to build a youth program on. The boats that are inexpensive enough like the optimist are not that well suited to this role according to comments by for example Rolf and Phill who run youth programs in their area. Before you start on a job you look for the right tool to use. F12 is the tool that many of us have felt missing for a long time.

Are we wrong in this assessment ? We can be, but you guys are just kicking in open doors.

You are not telling us anything we don't know already or know to be false. Nobody is helped by that. As and you guys don't appear to be doing any of this yourselfs, can we then ask that you don't frustrate this effort. For nobody can predict whether this will eventuall work or don't work. But anyone can predict with absolute certainty that it won't work if you are succesful in derailing it.

Hell, if I had a dollar for each time I was told that F16 would never work ..... !


Wouter


Wouter Hijink
Formula 16 NED 243 (one-off; homebuild)
The Netherlands
Re: F12 design and development [Re: Wouter] #94273
01/09/07 06:36 PM
01/09/07 06:36 PM
Joined: Jul 2006
Posts: 461
Victoria, Oztralia
mattaipan Offline OP
addict
mattaipan  Offline OP
addict

Joined: Jul 2006
Posts: 461
Victoria, Oztralia
Hi All

Have to say, I agree with Wouter <img src="http://www.catsailor.com/forums/images/graemlins/shocked.gif" alt="" />, its not as though theres 50 of these boats being built to 'rot' away in backyards if it doesn't take off, not saying that necessarily happens if a class doesn't become a 100 boat class.

I would much rather go outside build an idea to see if it works or not, rather than putting it all on paper and telling everyone it does. This planning stage and the building of one or two or three boats, needs to happen.

Everyones got their own ideas on how this cat should or could be built and rigged, but the fact remains you need to build one and try it, if it doesn't meet the ease of build, ease of sailing, ease of transport, or some sort of problem becomes evident, it can be altered to bring it into line, without having to bring 6 or 10 or 20 of them in line.

I've made myself 3 stainless mast bases for my boat over probably a 3 week period, to fine tune its design, so when I do fix it to the mast, I don't have to remove it and start again after one sail.

Now, please, we all know how hard it is for me to agree with Wouter, lets not make a habit of it <img src="http://www.catsailor.com/forums/images/graemlins/grin.gif" alt="" /> <img src="http://www.catsailor.com/forums/images/graemlins/grin.gif" alt="" />
(take that with humour please Wouter)

Regards


Matt Harper Homebuilt Taipan 4.9 AUS 329 'GOT WOOD' SEEDY PIRATES RACING TEAM
Re: F12 design and development [Re: Darryl_Barrett] #94274
01/09/07 06:39 PM
01/09/07 06:39 PM
Joined: Feb 2004
Posts: 1,012
South Australia
Darryl_Barrett Offline
old hand
Darryl_Barrett  Offline
old hand

Joined: Feb 2004
Posts: 1,012
South Australia
This is a worthy “project”, and to me illustrates, more than anything else, a cumulative vocalised realisation by more people than I have seen in the past, willing to focus on the fundamental problem in cat sailing over the last thirty years, that youth numbers sailing cats have been reducing at an alarming rate. To the point that at the moment it is very difficult to see any cat being sailed by anyone under the age of 40 in the foreseeable future. There have been many “reasons” enunciated as to why this has, is, and probably will continue to occur in the future, but none of these “reasons” have really helped to reverse this trend in a practical sense.
What we are seeing here is, at least a positive attempt to offer up a real practical alternative. There are a lot of varying “points of view” as to exactly how to proceed, but proceed you must. If any (or many) designs are developed from out of this discussion, (and not just further discussion), then there is the possibility of success. The first step is to design and build a cat, iron out any eccentricities, whether they are in the construction, the material supply, the building techniques, the cost, or the sailing characteristics, and then, when it is ready. And only when it is ready, present it to its potential market.
If ALL future difficulties that MAY arise with marketing, promotion and publicity, mass manufacture, export, and all the other myriad of problems that exist within the commercial world that are involved in operation a successful business were brought into consideration and applied at the planning stage of any actual embryonic project (like this one), then I don’t think any idea would ever “get off the ground”, it would all seem to be “just to hard”. So put simply, first steps first and don’t worry about that second step until the first is finished (or else you could stumble on the first)

Re: F12 design and development [Re: Darryl_Barrett] #94275
01/09/07 06:48 PM
01/09/07 06:48 PM
Joined: Jul 2004
Posts: 2,718
St Petersburg FL
Robi Offline
Carpal Tunnel
Robi  Offline
Carpal Tunnel

Joined: Jul 2004
Posts: 2,718
St Petersburg FL
[Linked Image]

Re: F12 design and development [Re: Robi] #94276
01/09/07 06:54 PM
01/09/07 06:54 PM
Joined: Feb 2004
Posts: 1,012
South Australia
Darryl_Barrett Offline
old hand
Darryl_Barrett  Offline
old hand

Joined: Feb 2004
Posts: 1,012
South Australia
too much popcorn - and you will look like Robi's avatar (he he he)

Re: F12 design and development [Re: Darryl_Barrett] #94277
01/09/07 07:03 PM
01/09/07 07:03 PM
Joined: Jun 2004
Posts: 393
Syracuse,N.Y
pbisesi Offline
enthusiast
pbisesi  Offline
enthusiast

Joined: Jun 2004
Posts: 393
Syracuse,N.Y
From what I've seen there is no doubt the boat can be built.
Doesn't seem that difficult.
I was simply trying to talk about what is ahead if it is to be a success and do what it was designed to do.
That is to promote youth sailing as I see it.(or is it for designers to impress themselves?)
To say you couldn't start talking to people right now about running a youth sailing program is just wrong.
Worst case you could use old $1000 or donated boats.
They could even be Hobies. (God Forbid)


Pat Bisesi Fleet 204
Re: F12 design and development [Re: pbisesi] #94278
01/09/07 07:24 PM
01/09/07 07:24 PM
Joined: Jul 2006
Posts: 461
Victoria, Oztralia
mattaipan Offline OP
addict
mattaipan  Offline OP
addict

Joined: Jul 2006
Posts: 461
Victoria, Oztralia
Hi Pat

Well the way I see it, and I'm not being disrespectful in anyway, thats probably worthy of another thread, Youth Sailing Programs or Youth Marketing. I do see totally were your coming from, let that be clear. But I started this thread as to not get into the nitty gritty of promotion, or programs, cause thats where the other thread was heading. Its more so designs could be looked at, discussed and ideas floated as to the designs.

Regards


Matt Harper Homebuilt Taipan 4.9 AUS 329 'GOT WOOD' SEEDY PIRATES RACING TEAM
Page 6 of 12 1 2 4 5 6 7 8 11 12

Moderated by  Damon Linkous 

Search

Who's Online Now
0 registered members (), 652 guests, and 96 spiders.
Key: Admin, Global Mod, Mod
Newest Members
Darryl, zorro, CraigJ, PaulEddo2, AUS180
8150 Registered Users
Top Posters(30 Days)
Forum Statistics
Forums26
Topics22,405
Posts267,056
Members8,150
Most Online2,167
Dec 19th, 2022
Powered by UBB.threads™ PHP Forum Software 7.7.1