Help me find rear beam for P-19

I have heavily worn the traveler track (part of the beam extrusion) on my P-19, would like to replace it (beam and track are extruded together) while I'm getting it ready.

I also could be talked into parting with my P-19 aluminum mast, in good condition. I bought a carbon fiber one some years ago and no longer think I will have use for the aluminum. For logistics, I live in Salt Lake area, Utah.

PM or email at blevins'at'sisna.com

Thanks for any assistance, Steved

use your old mast and rivet a track onto it.

Isn't the 18-2 also the same beam?

Cheshirecatman

or... roll your beam a little and rivet a track onto it.

The 18-2 does have the same beams