Is it possible to install the self tacking jib kit and still use the roller furling feature?
Posted By: whitecaps Re: I-20 Self Tacker - 05/30/02 05:54 PM
try contacting the factory at
http://www.performancecat.com/ or 714-835-6416
They had a prototype I20 with self-tacking jib at the New Year's Day race in San Diego.....I'm also thinking about switching to this. I see not reason why that would interfere with roller-furling (although anything is possible).
Alan Thompson
I20 - San Diego
Posted By: Barry Re: I-20 Self Tacker - 05/30/02 06:03 PM
I have the self-tacking jib with a full batten jib and a roller furling jib. There is a small 2:1 from the clew to the track. If you make it a 1:1 you will be able to furl the jib. i haven't found a need to furl the battened jib yet. When you park, the jib stays on the center line of the boat. It has been a great addition to the boat. I have some pictures somewhere I could send you. I would recomend the upgrade.
Posted By: Inter_Michael Re: I-20 Self Tacker - 05/30/02 07:12 PM
Are you saying that the 2:1 off the clew must not be used? Or is it a matter of lenghing the line?
Posted By: Barry Re: I-20 Self Tacker - 05/30/02 07:29 PM
Yes
The jib is so small you don't notice much difference. Lengthening the line won't work as you won't be able to sheet in all the way.