Rudder Repair - Catsailor.com Forums

Rudder Repair - 11/17/11 02:00 PM

Hi Everyone,

I've been having some trouble with the rudder on my boat not locking down into place. I dismantled it and re-assembled it and it worked for a couple of trips but then stopped again. I've bought all the new bits for it but was wondering if I should grease the spring when I put it into the rudder housing. So a) should I grease it and b) what grease should I use.

Regards, Tim

Posted By: RickWhite

Re: Rudder Repair - 11/18/11 01:09 PM

Grease atracts dirt, salt and makes it worse. Spray regularly with McLube.
Take it apart, and if the plunger is not smooth, replace it. If rough it will always mess up.

Posted By: mmiller

Re: Rudder Repair - 11/22/11 06:19 PM

Originally Posted by WightWave

Hi Everyone,

I've been having some trouble with the rudder on my boat not locking down into place. I dismantled it and re-assembled it and it worked for a couple of trips but then stopped again. I've bought all the new bits for it but was wondering if I should grease the spring when I put it into the rudder housing. So a) should I grease it and b) what grease should I use.

Regards, Tim

Rudder adjustment FAQ: http://www.hobiecat.com/forums/viewtopic.php?f=18&t=467

Posted By: Stewart

Re: Rudder Repair - 01/16/12 06:05 PM

all do not click on the links in jinhua1 post.. its a worm/malaware site

Posted By: RickWhite

Re: Rudder Repair - 01/16/12 08:15 PM

He has been removed