After the exploration scraping, I took to the 2 hulls with the sander/polisher (120grit paper) and took the area around the scraped section away a bit more
I cut some 230gsm mat to suit and glassed it in place....

NB:
I didn't disturb the glass that was already in place on the damaged hull for the simple reason, it aint broke and where it is has been fixed from the inside. more on that later... wink

the hulls ready for glassing....

[Linked Image]

didn't bother with a pic of the mat glassed in but you'll get the idea in a minute
wink

Yar, & this ere post be done without a sin'le drop o' rum passin' me lips

Kingy
started with Impara Cadet #3 / Mosquito #245
& now Mosquitos #1182 & #1740