I'm not going to reveal the laminate schedule until the boat has seen some heavy weather racing. I wouldn't want to give incorrect information without thorough testing. Let's just say it is heavier than I wanted (or heavier than was needed), but it was readily available.

It wasn't planned to vary the weight throughout the boat, but I did end up using a lighter outside skin on the tops of the decks because I was nervous about going overweight.

In hindsight, I could've used a lighter cloth and thinner core throughout with maybe two extra bulkheads added. As a general rule, the less stiff the hull laminate, the more internal structure is required in the form of bulkheads/frames.