I never should of looked at Airbornes pics of his shiny hulls. I have checked around here in Chattanooga for shops that will do mine but they all say they aren't set up for it, or not large enough shop, or too much work, etc. I did find one fellow that said he would spray it if I did the prep and sanding/polishing, but he didn't have room for the hulls to sit there. So here is my plan. I want to strip the hardware, prep the hulls and haul them to him, let him spray them, I take them back to my shop and sand/polish. Then back again for second and maybe third coat. Is this a viable plan? I think it would save me some real money. Or would it? Thanks.