If anyone is interested or cares, I have taken some pics of the mods I have done on my boat.
1. Doubler for rudder pull down.
2. Changed skipper trap to not go out to the eye on the outboard hull (comes straight up the eye in the tramp).
3. Got rid of clips on spin bridle lines. I use a knot in vectran with a cover and tied to the end of the pole. I think I might do what Timbo suggested and just do a loop in the future.
4. put clip on rotator for easy removal.
5. ran downhaul line to spin block eye on the hull.
6. Rudders and boards are currently being professionally faired (no pics as of yet).
7. small line to prevent spin sheets from getting wrapped around spin hoop.
8. spectra spliced into middle of spin sheets (ends up with knot holding end of spin sheets together on the tramp). This eliminates the weight/mess of tying bowlines to the clew of the spin.

Does any of this make me faster? Hell no, but I like working on my boat!