SRM-

1/4 wall is overkill. Definately. Didn't cost too much more in weight, or dollars, so I figured why not.

Front crossbar is two pieces. I figured this would be better than breaking up the tounge. I think I may add a piece underneath to help carry the load, or perhaps just plate it.

The A-frame part was a question for me too. I can't explain why I want it this way. There really is no really good reason for it. But I like it? <img src="http://www.catsailor.com/forums/images/graemlins/confused.gif" alt="" /> My thinking may have been to get wires to the front marker lights slightly easier, and to add a little more space for whatever. Perhaps a brace running forward under the decking, inline with the side rails, would be sufficient?

The beams of the trailer are further apart than the beams on the boat. I'm thinking that if I want to add a double stack, or rear mast support I will be able to slide the boat forward a few inches and go straight up with it. For a double stack set up I planned on two legs with a crossbar on top. Make them easily removable with pins, and a bar going front to back to tie it all together.

-Spellcheck is destroying my capacity to spell- <img src="http://www.catsailor.com/forums/images/graemlins/tongue.gif" alt="" />