Don’t rely see the necessity to let a layer of epoxy to cure before you put the laminate.
Normally I put on a layer of epoxy, then the glass and then I let it for a wile to let the wood and glass soak up the epoxy. After that I remove the air bubbles and add some epoxy to the dry spots.
When the glass has set but still sticky I give a new layer of resin, and that’s it. Alternatively do all at once and put a peel ply last. There is of course a risk to get dry spots, but it’s very small. But before you do the laminate make the surface perfect, no use to let fairing to after laminating. After that you are ready to sand and paint.