Quote
I stuck with the six and never had any problem. By the way, here's a link to some pix of the inside of the H-16 hull, including the transom (note the aluminum plate that's glassed in):

http://www.thebeachcats.com/index.php?module=pictures&g2_itemId=10731
Thanx. That was what I was curious about....if the gudgeon holes went all the way through or if the plate was thick enough and the holes stopped short of the screw length. Odd though...I decided to tap my holes out (#12-28) just to clean up the threads and the tap seemed to bottom out at one point so I didn't force it.