I have a fully operational autoclave in the Washington DC area looking for a good home. It is 34 feet long and 8 inches inside diameter - perfect for beach cat masts and many other composite parts. It has a flanged joint in the middle so it can be transported in two 17 foot sections. It operates at 350 Deg F and as high a pressure as you want. Although it has a penetration for insturmentation you will have to provide your own thermocouples. Uses about 3kw of power to full temperature - electric strip heaters. The picture shows a mast sitting on top of the autoclave looking as the power end. This will be available in mid june. I have made four masts and lots of other parts using aerospace surplus prepreg carbon. Does a great job. My wife would greatly appreciate having her backyard returned.
