I guess I still dont understand what is missing. I take it you dont have a jib. Bridle is there, forestay is there, there should be a jib haulyard(small cable) going up and over a block attached to an eye just below the hounds, back down to the base of the mast,on this end of the haulyard there will be a small block, now... attached to the base of the mast is an eye with a line attached to it (approx 3'x 1/4")which is then fed up thru the little block at the end of the haulyard and then back down to a clam cleat on the side of the mast. the haulyard cable(1/8") is about the same length (I dont know the measurement ) as the forestay . So there is a detachable line(rope-1/4") attached to the now lower end of the haulyard cable, this is detachable so that you dont have to have it messing up your tramp or mast.
At the bridle there is a chainplate. either hook the jib directly to this or go to the catsailor store and buy the clip that came on the boat when it was new.
Hope this helps.


Auscat MKV 444 A class
NACRA I-20- 440/CATHATKA