Hi David. Yes nearly done. I've posted a photo of the deck piece done with one coat of paint thus far. 2pac paint is a harsh judge! but not withstanding the fill job, I am very happy with the strength of the deck. I was planning to wrap a board in multiple layers of cling wrap for the bog job. Seemed like a good way to ensure no leaks. I did a test to make sure the epoxy doesn't eat the plastic and it all looks good. As for the bog bit. I am going to do it from underneath. With all the various pots I've mixed thus far I have noticed that using Micro Balloons as the filler rather than talc you seem to be able to get a really good paste whith virtually no sag. The pot life is a bit short in this state but I plan to do one at a time and perhaps some masking tape to make sure. Cheers Oops! can't see where you upload a file in the new forum. Photo might have to wait.