I have a Hobie 18SX with EPO rudders. I have noticed damage to the rudders in the form of a puncture where the set screw used to control rake has worn (crushed) into the rudder. I want to fill the holes with somesort of epoxy to repair the rudder but I want to select a hard epoxy to minimize the time it takes for the problem to reoccour. I was actually thinking about using JB WELD but I wanted the opinion of those much smarter than me before I proceed. The holes are about 1/4 inch diameter and probably 1/8 to 1/4 inch deep. Thanks for your input.


Collin Casey
Infusion Platform + C2 rig and rags = one fast cookie