Originally Posted by phill
xuraax,
The Razor is about simplifying the building and the butt strap joint is simpler than the scarf. The keel panels are flat and do not need a scarf joint. In hindsight I think the side panels will take a butt strap joint too. The curve will not be that great and the joint can probably be made of after curve is induced.
Along the same lines the chines are easier than steaming the hull to coach the ply to take the intended shape. This design is much less stressful for both the builder and the ply.

Regards,
Phill


Thank you so much for designing this! As soon as I get out of grad. school and resume having a "real" income, I'm building one. By the way, I vote for butt joints all the way! They're so easy.

I built two stitch-and-glue boats from Bateau.com, and I've been incredibly impressed with that method. I don't have the patience or attention to detail required for tortured ply, but stitch and glue is right up my alley.