Originally Posted by Karl_Brogger

I've got some 1/8" spectra left over from a dicked up set of trap lines I'll try out. The lace on the rear bar definetly needs to be changed out to something more slippery. Actually, this might be tomorrow's project.


Stick with a truckers hitch just inside the tramp on the side lacing. Loop from the eye strap back to the truckers hitch a couple of times for purchase and then pull really tight and tie it off. You can spray mclube on the line to reduce friction a little - just avoid the end you will be tieing knots with. On the rear bar you can use a harness bar to pull upwards while you push down on the cross bar with your foot. You can get the tramp nice and tight this way if you are using a skinny line. 1/8" spectra would work well. I then use needle nose pliers to dog off the line while I move to the next section. Don't go for 100% tight in one stage - I normally do it in 3 stages to keep the tramp tension even.

Last edited by flumpmaster; 04/21/09 01:10 PM.

Dave Ingram is my president. tcdyc rules