I followed the instructions leter for leter. I used the 206 hardener, which allows more working time because it was over 90 degrees when I did it. When you use the epoxy filler, use more rather than less to make a pretty thick paste. If your jib and main traveller tracks are at all loose, drill out all the rivets and reattach them. You will not be able to do this in the future without having drilled out rivet cases in your frame forever with a glued boat. So if you're not sure, do it while the boat is apart.

And, I got everything I needed from Jamestown Distributers(don't know the website, but any serch will find them) to get everything I needed. Things like rivets will be a lot less expensive if you buy a box of 100 from them(the size the article recomends will fit almost every rivet on the boat).

Also, do a search on this website, because nearly every question you will have has probably already been answered.

Hope this helps, andrew