Here is the beer cooler:

http://www.themanshed.net/archived-projects/supercat-20/?g2_itemId=101

Most of it was Craig's idea from the hull storage in my G-Cat. He actually built the cooler, out of this racecar engineering experience - I just guided him in the “art” of fiberglass.

I fabricated the porthole and missing desk structure. I taped off the other side, then waxed it, and made a mold. I had to spin it around 180 degrees because of the angle on the hull. Then I faired it into the hull. It is thick enough that the crew can open it under stress while sailing - grog for the crew! The beer stays cold and may add frozen drinks.

It was a team effort. So if you ever end up with a hole in your deck or want to make one…………
..Mike