The NACRA 5.5SL jib overlaps the main beam enough such that the lead blocks for the barberhauler need to run on a wire or super low stretch cordage that runs from the outboard beam chip back to the shroud chainplate. If you try to run off the main beam the lead is actually forward of the clew which is a poor choice if one is seeking better boat speed.
<br>
<br>write back with any other questions or if you are unsure how to intall this correctly.
<br>
<br>Mark A. Michaelsen ~MM~
<br>SPS Website: http://www.sailingproshop.com
<br>Small Craft Advisories Sailing Centers
<br>1244 Pacific Coast Highway
<br>Seal Beach, Ca 90740
<br>(562) 594-8749 Voice
<br>(562) 594-0208 FAX
<br>(800) 354-7245 Order Line
<br>(714) 238-0925 International Voice Mail/Pager
<br>
<br>
<br>
<br>
<br>
<br><br><br>Mark A. Michaelsen ~MM~
<br>1244 Pacific Coast Highway
<br>(562) 594-8749 Voice
<br>
<br>
<br>
<br>
<br>
<br>
<br>