I have had that happen on my old Prindle 16. Just clean it up, load it up with 5200 and rivet her in. I would also check the rest of the mast closely. Chances are if you are seeing that there...you will see other areas that need attention. Also make sure you seal any possible holes with the 5200. If you capsize and the mast leaks, the boat will go turtle. We recently stripped my SC 20 mast bare and sealed everything with some special aircraft sealant Rob uses.


craig van eaton
Supercat 20
TEAM CYBERSPEED
www.TeamCyberspeed.com
Endurance Series
www.SailSeries.com