He guys, your logged on too ! I just attented a stupid meeting where no-one seemed to be able to think.
<br>
<br>Phill, 2 inches smaller = 50 mm on a board that is at 230mm wide. This comes out at 22 %
<br>
<br>2 inches longer at 630 mm max length comes out at 8 %.
<br>
<br>Ratio in aspect ratios is (630/230) / (680/ 180) = 2,74 / 3,78 = 73% or Taipan board ratio to Auscat ratio = 73 %. A few inches here and there can make a big difference !
<br>
<br>Surface area ratio 0,1449 / 0,1224 = 118 %
<br>
<br>I wonder what exactly causes the Board tripping feeling ? Do you have any suggestions ? Is it the board area or the steaper efficiency graph ?
<br>
<br>Wouter
<br><br><br>