I have a few cracks in the boat, some of them probably happened during transport. I'm not sure how to go about fixing them. The worst problem is the crack inside the daggerboard hole. I have checked for leaks with soap and airpressure inside the hull and there are lots of bubbles from the crack in the daggerboardhole and from the largest crack in the hull.

It would be of great help to have some pictures and maybe a video of a similar repairjob.


This crack is not leaking, but the fiberglass is flexing underneath.

This crack is leaking alot and about 25cm long. It is possible to push through the fiberglass.

Leaking crack inside daggerboard hole.

Probably just a gelcoat scratch, the fiberglass looks intact.