Rolf,
Sorry, too busy building to take pics.
The vacuum table is now hoisted to the ceiling of my workshop while I use the table frame as the base of a jig to assemble
the Central mounting module of the Farrier trimaran that I'm building. Last week I made a 5mm thick glass plate on the table along with other stuff it was 800mm x 1200mm which I've cut into parts for the CMM. 9 layers of 450gm alternating Bi Directional and Double Bias cloth vacuumed down with around 10 pounds pressure per square inch.
(Amazing how it adds up that is something like a total of 1536 pounds of pressure.) Based on weight and area measurements I achieved a 55/45% glass to resin ratio.
When I lower the table down to make bulkheads I will take some pics of it.
Regards,
Phill

Last edited by phill; 10/07/10 05:59 AM.
I know that the voices in my head aint real,
but they have some pretty good ideas.
There is no such thing as a quick fix and I've never had free lunch!