Eric, I live in Chile, I havn't found a used mast yet, but I have an alluminum tube that might be good, at least for a while. I'm also exploring the possibility to get a mast manufactured in Argenitna, or just the extrusion, they are looking for the specs but I'm not sure if they will find them, I havn't found specific info on the web myself. I need the following info, if you can take the time to help me, I would be just great, I really appreciate it.
- Mast section (front and side dimensions)
- Thickness (just curious here)
- Length, I think it's 27 ft including the base and the head parts.
- Distance from the base of the mast to the points where are connected the forestay, the shrouds, the trapezes and the diamond wires (i guess the spreaders are in the midpoint of the diamond wires). Here lets take as a reference point (because I don't have the base casting) the top of the ball where the mast stands.
- wire lengths (shrouds, forestay, bridle, diamond). On the class rules I've seen wire lengths, but except for the bridle, they are the same for all nacras, and measures are indicated as minimum, so I'm not sure if I can use them.
Thank you so much
Andres Chianale