Last weekend broke in two halfs dageerboard of my Nacra Inter 18. Due to the lack of Nacra dealers in Russia, I'll appreciate any idea how to repair it or get used or new board on decent price.
Regards,
Nail
Depends on the damage. You can have a look here to see how I did it.
http://multimani.blogspot.com/2007/06/noe-glassfiberarbeide.htmlSand a nice taper down to the break.
Glue the parts together. You need to glue it back together in a jig to keep it straight and aligned!
Put on new glass. 0 - 90 and +-45 deg to the break.
Do a good job and it is stronger than it used to be.
If you have an internal spar in the daggerboard, it gets more complex and investigating doing a mold off the remaining daggerboard to build a new one becomes attractive.
Good luck.
