I've been stretching/modifying Chris Tucker's F12 DS12 (http://www.ctmd.com.au/download.pdf) in CAD to make it an F16. Below is a link to some hull surface models. I raised the freeboard forward, and a bit overall, and faired the hull a little (probably just an artifact of my software). I like chines because they are simpler to build, but I really don't know how severe a performance hit one will take against a rounded hull. Hull beam is about 13.5" (350mm), they are right about 5M long... Any thoughts? Since I'm having fun, I'll probably proceed in CAD with the buildable model... Also, forgive me, I'm a total newb on this forum....


https://picasaweb.google.com/andersenpj/F16Concept?authuser=0&feat=directlink