I had to come back and post an update on Blue. The four of us went back to Roatan a couple of weeks ago and ran into the people we sold the Wave to. Ron started telling us about these cams he needed changed so we jumped all over that and offered to do it for him. He was quite happy to have us make the service call as he had never seen it done. We drilled out the rivets, cleaned the sand out of the springs installed the new cams with the two piece screws and reset the tension screws. A quick look around the boat had us tightening the tramp and shroud wires. They had taken the mast off and reinstalled it sitting on the ball but sitting on the pin. We removed the pin and dropped the mast down in the proper place and reinstalled the pin. When we had finished Ron let us take it for a sail. We had it out for two hours and had a ball cruising up and down the shoreline of West Bay beach with a cooler of Salva Vida. Beer never tasted better than the frosty ones on Service Call 2006.