Hi
Been a while, finally got my password and log in resorted.
Have been building some bits:
Two floats one to the stage of final fill. the other needs glass on one outside and the chainplate installed.
My building friend is reacting to the West epoxy slowing down the bigger jobs.

Currently cutting beam molds on the CNC.

Have flat panels made for the hull (Except the interiour seats that were not drawn when we vac bagged the flat sections together with the float bulkheads.

Cutting the Glass/corecell/class vac bagged panels on the CNC, working well. Use straight router bits on these panels. (Compression bits are too dear. )

MDF using spiral two flute 6mm solid carbide bits.

Cheers
David