Originally Posted by samc99us
Neat, but 90% chance it is in the way of the tiller arms on the Infusion when sailing. Also, the deal with the port holes I listed are the screw in hatch portion has a lip that overlaps the o-ring and deck seam. It is far more watertight than a standard hatch, and is only a 1/4 turn to remove!


and the water comes from below (except rain) to go under that lip. Not sure this will change much, but best of luck. On the 20 we mounted w/ 4200 and if the seal leaked you grease it w/ vaseline or something similar, you should have plenty of that around.


"I said, now, I said ,pay attention boy!"

The cure for anything is salt water - sweat, tears, or the sea
Isak Dinesen
If a man is to be obsessed by something.... I suppose a boat is as good as anything... perhaps a bit better than most.
E. B. White