Hey thanks. Need to study the diagram.

For quick fix I used shock cord, a couple of halyard knots under the traveler car pin to disengage it and a loop around the casting/pylon to ensure that it is drawn straight down the track. Hog ties to crimp shock cord and will get rubberweld rigging tape to cover seal the deal.

Primitive but I think it will work for now. The shock cord pull the car to the outside and the jib sheet pulls the car to the center.

Has to to be better than scrambling forward and unpinning it and re-pinning it!

I know that the set up that was described is the way to go--my other boat had a similar rig..


Will let you know how it sails!