I will be happy the share information when it is finished. Right now it just one problem after another.
This boat started as a updated version of the 70's tunnelhull Moths. It ended up as 2 boats. A narrow beam small rig that could compete with Portsmouth dinghies in the Wed Nights. There is enough strength to allow it to go to 8.5 ft wide with a larger skiff derived rig. (see attached drawing).
The big problem is because of the hull shape the hulls has to be built in halves. I built a 1/4 scale model to be sure it could be built but it is still going slow with a lot of problems to be solved.
