-----"A barrier coat (something to make the hull water tight) and bottom paint would also be needed since the hulls were probably not intended for full time immersion."

-----"Lastly, you would need to construct some sort of "Y" shapped mooring bridle to attach to each bow so the boat will remain oriented into the wind."

I'm faced with a launching problem similar to that of 007Jeep except that I'm only considering mooring for about a week and a half. Does anyone have a recommendation for a barrier coat? You also recommend construction of a y-shaped mooring bridle. Is the general concensus that it would be unwize to simply knot up a y-shaped mooring bridle with rope?
Thanks,
TRowe