Hey, everyone. I was out over the holiday weekend and forgot to pull the pin that holds the base of the mast steady while stepping the mast. While I was down there trying to pull it out, I noticed that the cast base of the mast is somewhat loose in its connection to the long extruded section of the mast. I could see the crack between the two pieces get larger and smaller as the mast shifted. Seems like there are only two rivets holing the two pieces together. Can I just drill the rivets out and replace them, or do I need to put rivets in other places around the mast base, as well? Thanks for any tips or advice you might have. -Matt