Skunkworks.
Nice set of spreaders.
I hope you have a means of holding the wire in the slot on the sreaders.
If not make sure you tape it well with electrical tape to hold it in. A number of masts have broken when the wire pops out of the AHPS composite spreaders. It usualy happens on down wind legs. In very strong conditions the lee wire goes really slack and falls out. You don't find out until you jibe and then it is too late.
Thankfully it hasn't happenned to me. I tape mine in. I was lucky enough to learn from the mistakes of others.
Regards,
Phill

I know that the voices in my head aint real,
but they have some pretty good ideas.
There is no such thing as a quick fix and I've never had free lunch!