This will work for the Prindle too

1.) Get Murray’s part number 01-4216 (or simular part thereof) and install ASAP with the knot facing to the rear.

2.) Sailcoat the snot out of your sail tract and the luff rope of your sail.

3.) When getting ready to lower your sail, pull (more like yank) on the halyard until it stops, and HOLD IT THERE.

4.) With your other hand (or crew) grab your mast rotator and swing the mast so the leading edge is facing the starboard hull (trailing edge to the port hull) and HOLD IT THERE.

5.) Now, let go of the main halyard and pull on the sail – it should come down, and if you have no tangles in the halyard, and sail coated the snot out of it, it will not require any major mussel building assistance. And at this time you can let go of the mast rotator.