Qb2-
On my Taipan the new tramp was extremely tight fit and I too was trying to get it on by myself. I finally figured out a way to do it by myself. First, I sprayed the tracks with dry silicone lubricant, then I attached the jib blocks at the rear inside corners of the rear beam and ran a separate line (to give me enough length to reach it from the front beam) under the tramp to the front of the boat. Then I positioned myself at the front of the boat and guiding the bolt rope with one hand while pulling the jib sheet line with the other I was able to get the tramp on.
Worked well for me!!

Kirt