Thanks for the help.

I just got the boat a few days ago, and will not be able to rig it till Saturday. There are two different size spins with the boat. I have not measured them yet. The spin pole has a bail at the end, I assume for attaching a block. There are two small sheet metal screws in the end of the pole? The main traveler was modified at the ends to accept blocks. There are two hounds on the mast, I guess for the different size spins. The most puzzling piece is two cam cleats on top of the rear traveler about a foot from the end. They are positioned for cleating a line coming from aft of the rear beam? On the front beam there are also two cleats, roll furler, spin guy? I have not determined where the halyard cleats yet. There are two large cam cleats on slides. They fit in the jib tracks. They could be for cross sheeting the jib and/or cleating the spin.

Thanks again for the help.



Mike W.

Nacra 6.0na #325