I am rebuilding my 83 nacra 5.2 and have a few questions. I have reviewed the last 5 years of posts for the nacra 5.2 and most of my questions have been answered,(yes there are over a thousand of them,a lot of answers from Jake). I have done a bottom job on the hulls and put new gelcoat on the entire hulls, fixed any bad spots on the rudders and daggerboards and gelcoated them as well, and bought a new tramp.

1.Does anyone know the correct alignment of the rudders to each other.

2.Should I buy the factory hiking stick "attachment" to the tiller bar or buy something else.

3.I have to rebuild the ends on the tiller tie bar, but I read in one of the posts to just use the hobie 20 setup. I have a lot of slop in the whole rudder system.

4.Does anyone know where I can find the "nacra" decal for the hulls?

5.Someone said in the posts, to use a smaller diameter line than what is recommended for the main sheet.

Thanks in advance for your time.
airborne