I've used a few vacuum pumps over the years and found that those that use oil as a lube do put out a fine mist that could be misconstrued as smoke. I put the pump output into a 5 gal. pail with some rags in it. That captures the oil mist and stops it from getting on your next bonding project.
I've used a few vacuum pumps over the years and found that those that use oil as a lube do put out a fine mist that could be misconstrued as smoke. I put the pump output into a 5 gal. pail with some rags in it. That captures the oil mist and stops it from getting on your next bonding project.
Nice project how far along are you now?
Mike Shappell www.themanshed.com TMS-20 Builder G-Cat 5.7 - Current Boat NACRA 5.2 - early 70's
